Mesh panel CORNER

The CORNER mesh panel was made for the points where the fence line turns — and those are exactly where panels lose their geometry first.

The 3500 × 2000 mm panel weighs 10.6 kg, carries additional corner reinforcement, 2.2 × 3.2 mm wire and profiles of 38 mm vertically and 25 mm horizontally. The corner reinforcement adds little mass — half a kilogram against the ECO variant — but changes how the panel behaves at the point of highest stress.

Why corners are the critical point

At a corner both fence lines transfer wind load into each other and the feet cannot sit on a single axis. An ordinary panel then works in torsion and loses its angle within weeks — the fence starts to open up and the clamps work loose. Reinforced corners hold the panel geometry and let you close the site perimeter squarely.

• corners and changes of direction around a site
• enclosures around irregularly shaped buildings
• gateways and openings where the line turns
• fencing on slopes and ground with changing levels

Combining it with the rest of the fence

CORNER is used selectively, to complete a run of ECO or STANDARD panels — there is no reason to build a whole perimeter from it. The panel geometry is identical, so it seats in the same feet and joins with the same clamps as the other variants.